Store

Bentley Supersports (6.0 W12 Bi-Turbo) Tuning 2009 – 2010

$2,600.00

Clear
Description

Bentley

Supersports

6.0 W12 Bi-Turbo

2009 – 2010

Tuning Method:

Bench

HP Gain: 130

TQ Gain: 190

The Velos Stage 2 Performance Software (tune) for the Bentley Supersports is a complete remap of both ECU’s and increases your Bentley W12 output by over 20%. With peak gains of 193 lb ft of torque and 181 HP the Velos Performance upgrade for your Bentley is a must for the enthusiasts looking to maximize their Bentleys output without any compromise. The remap consist of adjustments to several maps including fuel, ignition, throttle, boost, and other vital area required for the vehicle to operate as intended from the manufacturer. Changes to limiters allow the W12 motor to operate at full potential while staying well within safety parameters.

The Bentley Supersports gained its fame from being the fastest Bentley Production car ever built. With a top speed limit of 210 MPH from factory our engineers focused on maximizing mid range power where the majority of time is spent. Through careful remapping they were able to increase the cars output by 193 lb ft of torque and 181 hp at 5000 RPM (as seen on our dyne chart below). Our performance software upgrade for the Bentley Supersports provides the consumer with impressive gains that can be expected anywhere in the World.

As electronic and computer technology rapidly advances at exponential rates long gone are the days of carburetors, distributors and set ignition timing. For years these were some of the components tuners manipulated to extract additional horsepower from our sport cars of yesteryears. As computer controlled engines emerged these and eventually many other parameters critical to the efficiency and operation of these high-performance engines became controlled by one or in some case more than one computer. Vehicle manufactures found that they can limit an engines power, maintain one powertrain platform and offer it in many trims levels and sometimes in different vehicle models within the vehicle mark with little change to hardware components. This proved to be a cost effective way to offer special edition vehicles with more power than their standard counter parts or having enticing bumps in power as the model year’s progress on particular chassis.

Velos Designwerks’ software engineers are able to communicate with the vehicle’s engine management systems carefully scrutinizing all areas of the control module in doing so our engineers acquire an understanding for what the powertrain is capable of delivering in terms of reliable power. The benefits to this method lie in the fact that all safety parameters instilled by the factory engineers are maintained and all other operation modules and computers such as traction control, stability management systems and transmission control modules are aware of the changes and thus are able to work harmoniously just as the factory intended. Velos Designwerks performance software has been at the forefront in terms of technology and strives to deliver exceptionally reliable, user friendly software packages for the daily driven luxury or exotic vehicle in your garage.

Velos Designwerks performance software key features include but are not limited to:

  • Improved Throttle Response
  • Re-calibrated settings for a smoother part throttle transitions
  • Re-calibrated settings for a smoother and more linear power delivery
  • Raised RPM thresholds (where applicable)
  • Increased Boost levels (where applicable)
  • Re-calibrations for end user’s available premium fuel (91/93oct. or 100oct)
  • Off road only/track use tunes available.
  • Top Speed Limiter removal
  • Exhaust burble & “pops” (where applicable)
  • Some features will vary from vehicle to vehicle. Please do not hesitate to call us at 786-401-6520 or email us at info@velosdesignwerks.com with any question pertaining to your vehicle. Don’t forget to include year/make and model.

16537980926_c6c7278881_z

16562877662_f3e45cda64_z

Dyno Charts:

STD:

15891381894_9989d09c9f_b

SAE:

16326485240_0c4e0eec37_b

 

ECU Location:

Please disconnect negative on battery located inside trunk on driver side.

Both ECU’s are located on the passenger side (right) of the vehicle against the firewall inside the engine bay. Careful remove top cover (2 screws w/ half twist)

Carefully unclip connectors and slide out ECU’s. Contact our technical team at 7864016520 for assistance.

ECU (connectors) are labeled 01 & 02. Please label each ECU

IMG_2342

IMG_2343

IMG_2341

Additional Information
Tuning Type

Bench

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bentley Supersports (6.0 W12 Bi-Turbo) Tuning 2009 – 2010”

Your email address will not be published. Required fields are marked *

12 − one =

Description

Bentley

Supersports

6.0 W12 Bi-Turbo

2009 – 2010

Tuning Method:

Bench

HP Gain: 130

TQ Gain: 190

The Velos Stage 2 Performance Software (tune) for the Bentley Supersports is a complete remap of both ECU’s and increases your Bentley W12 output by over 20%. With peak gains of 193 lb ft of torque and 181 HP the Velos Performance upgrade for your Bentley is a must for the enthusiasts looking to maximize their Bentleys output without any compromise. The remap consist of adjustments to several maps including fuel, ignition, throttle, boost, and other vital area required for the vehicle to operate as intended from the manufacturer. Changes to limiters allow the W12 motor to operate at full potential while staying well within safety parameters.

The Bentley Supersports gained its fame from being the fastest Bentley Production car ever built. With a top speed limit of 210 MPH from factory our engineers focused on maximizing mid range power where the majority of time is spent. Through careful remapping they were able to increase the cars output by 193 lb ft of torque and 181 hp at 5000 RPM (as seen on our dyne chart below). Our performance software upgrade for the Bentley Supersports provides the consumer with impressive gains that can be expected anywhere in the World.

As electronic and computer technology rapidly advances at exponential rates long gone are the days of carburetors, distributors and set ignition timing. For years these were some of the components tuners manipulated to extract additional horsepower from our sport cars of yesteryears. As computer controlled engines emerged these and eventually many other parameters critical to the efficiency and operation of these high-performance engines became controlled by one or in some case more than one computer. Vehicle manufactures found that they can limit an engines power, maintain one powertrain platform and offer it in many trims levels and sometimes in different vehicle models within the vehicle mark with little change to hardware components. This proved to be a cost effective way to offer special edition vehicles with more power than their standard counter parts or having enticing bumps in power as the model year’s progress on particular chassis.

Velos Designwerks’ software engineers are able to communicate with the vehicle’s engine management systems carefully scrutinizing all areas of the control module in doing so our engineers acquire an understanding for what the powertrain is capable of delivering in terms of reliable power. The benefits to this method lie in the fact that all safety parameters instilled by the factory engineers are maintained and all other operation modules and computers such as traction control, stability management systems and transmission control modules are aware of the changes and thus are able to work harmoniously just as the factory intended. Velos Designwerks performance software has been at the forefront in terms of technology and strives to deliver exceptionally reliable, user friendly software packages for the daily driven luxury or exotic vehicle in your garage.

Velos Designwerks performance software key features include but are not limited to:

  • Improved Throttle Response
  • Re-calibrated settings for a smoother part throttle transitions
  • Re-calibrated settings for a smoother and more linear power delivery
  • Raised RPM thresholds (where applicable)
  • Increased Boost levels (where applicable)
  • Re-calibrations for end user’s available premium fuel (91/93oct. or 100oct)
  • Off road only/track use tunes available.
  • Top Speed Limiter removal
  • Exhaust burble & “pops” (where applicable)
  • Some features will vary from vehicle to vehicle. Please do not hesitate to call us at 786-401-6520 or email us at info@velosdesignwerks.com with any question pertaining to your vehicle. Don’t forget to include year/make and model.

16537980926_c6c7278881_z

16562877662_f3e45cda64_z

Dyno Charts:

STD:

15891381894_9989d09c9f_b

SAE:

16326485240_0c4e0eec37_b

 

ECU Location:

Please disconnect negative on battery located inside trunk on driver side.

Both ECU’s are located on the passenger side (right) of the vehicle against the firewall inside the engine bay. Careful remove top cover (2 screws w/ half twist)

Carefully unclip connectors and slide out ECU’s. Contact our technical team at 7864016520 for assistance.

ECU (connectors) are labeled 01 & 02. Please label each ECU

IMG_2342

IMG_2343

IMG_2341

Additional Information
Tuning Type

Bench

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bentley Supersports (6.0 W12 Bi-Turbo) Tuning 2009 – 2010”

Your email address will not be published. Required fields are marked *

17 + 10 =