Store

Audi RS7 (4.0 TFSI V8) Tuning 2014 – 2017

$2,700.00

Clear
SKU: N/A Categories: , Tags: , , , ,
Description

Audi

RS7

4.0 TFSI V8

2014 – 2017

Tuning Method:

VELOS OBD Module, Bench

HP Gain: 139

TQ Gain: 151

The Velos Stage 2 Performance Software (tune) for the Audi RS7 is a complete remap of the ECU and increases your RS7’s output by over 19%. With peak gains of  131 lb ft of torque to the wheels and 115 HP to the wheels the Velos Performance upgrade for your Audi RS7 is a must for the enthusiasts looking to maximize their Audi’s output without any compromise. The remap consist of adjustments to several maps including fuel, ignition, throttle, boost, and other vital area required for the vehicle to operate as intended from the manufacturer. Changes to limiters allow the 5.0 motor to operate at full potential while staying well within safety parameters.

Through careful remapping they were able to increase the cars output by 139 hp of torque and 151 tq at 5600 RPM (as seen on our dyne chart below). Our performance software upgrade for the Audi RS7 provides the consumer with impressive gains that can be expected anywhere in the World.

As electronic and computer technology rapidly advances at exponential rates long gone are the days of carburetors, distributors and set ignition timing. For years these were some of the components tuners manipulated to extract additional horsepower from our sport cars of yesteryears. As computer controlled engines emerged these and eventually many other parameters critical to the efficiency and operation of these high-performance engines became controlled by one or in some case more than one computer. Vehicle manufactures found that they can limit an engines power, maintain one powertrain platform and offer it in many trims levels and sometimes in different vehicle models within the vehicle mark with little change to hardware components. This proved to be a cost effective way to offer special edition vehicles with more power than their standard counter parts or having enticing bumps in power as the model year’s progress on particular chassis.

Velos Designwerks’ software engineers are able to communicate with the vehicle’s engine management systems carefully scrutinizing all areas of the control module in doing so our engineers acquire an understanding for what the powertrain is capable of delivering in terms of reliable power. The benefits to this method lie in the fact that all safety parameters instilled by the factory engineers are maintained and all other operation modules and computers such as traction control, stability management systems and transmission control modules are aware of the changes and thus are able to work harmoniously just as the factory intended. Velos Designwerks performance software has been at the forefront in terms of technology and strives to deliver exceptionally reliable, user friendly software packages for the daily driven luxury or exotic vehicle in your garage.

Velos Designwerks performance software key features include but are not limited to:

  • Improved Throttle Response
  • Re-calibrated settings for a smoother part throttle transitions
  • Re-calibrated settings for a smoother and more linear power delivery
  • Raised RPM thresholds (where applicable)
  • Increased Boost levels (where applicable)
  • Re-calibrations for end user’s available premium fuel (91/93oct. or 100oct)
  • Off road only/track use tunes available.
  • Top Speed Limiter removal
  • Exhaust burble & “pops” (where applicable)
  • Some features will vary from vehicle to vehicle. Please do not hesitate to call us at 786-401-6520 or email us at info@velosdesignwerks.com with any question pertaining to your vehicle. Don’t forget to include year/make and model.

Dyno Video:

Dyno Charts:

Additional Information
Tuning Type

Bench, VELOS OBD Module

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Audi RS7 (4.0 TFSI V8) Tuning 2014 – 2017”

Your email address will not be published. Required fields are marked *

four × 4 =

Description

Audi

RS7

4.0 TFSI V8

2014 – 2017

Tuning Method:

VELOS OBD Module, Bench

HP Gain: 139

TQ Gain: 151

The Velos Stage 2 Performance Software (tune) for the Audi RS7 is a complete remap of the ECU and increases your RS7’s output by over 19%. With peak gains of  131 lb ft of torque to the wheels and 115 HP to the wheels the Velos Performance upgrade for your Audi RS7 is a must for the enthusiasts looking to maximize their Audi’s output without any compromise. The remap consist of adjustments to several maps including fuel, ignition, throttle, boost, and other vital area required for the vehicle to operate as intended from the manufacturer. Changes to limiters allow the 5.0 motor to operate at full potential while staying well within safety parameters.

Through careful remapping they were able to increase the cars output by 139 hp of torque and 151 tq at 5600 RPM (as seen on our dyne chart below). Our performance software upgrade for the Audi RS7 provides the consumer with impressive gains that can be expected anywhere in the World.

As electronic and computer technology rapidly advances at exponential rates long gone are the days of carburetors, distributors and set ignition timing. For years these were some of the components tuners manipulated to extract additional horsepower from our sport cars of yesteryears. As computer controlled engines emerged these and eventually many other parameters critical to the efficiency and operation of these high-performance engines became controlled by one or in some case more than one computer. Vehicle manufactures found that they can limit an engines power, maintain one powertrain platform and offer it in many trims levels and sometimes in different vehicle models within the vehicle mark with little change to hardware components. This proved to be a cost effective way to offer special edition vehicles with more power than their standard counter parts or having enticing bumps in power as the model year’s progress on particular chassis.

Velos Designwerks’ software engineers are able to communicate with the vehicle’s engine management systems carefully scrutinizing all areas of the control module in doing so our engineers acquire an understanding for what the powertrain is capable of delivering in terms of reliable power. The benefits to this method lie in the fact that all safety parameters instilled by the factory engineers are maintained and all other operation modules and computers such as traction control, stability management systems and transmission control modules are aware of the changes and thus are able to work harmoniously just as the factory intended. Velos Designwerks performance software has been at the forefront in terms of technology and strives to deliver exceptionally reliable, user friendly software packages for the daily driven luxury or exotic vehicle in your garage.

Velos Designwerks performance software key features include but are not limited to:

  • Improved Throttle Response
  • Re-calibrated settings for a smoother part throttle transitions
  • Re-calibrated settings for a smoother and more linear power delivery
  • Raised RPM thresholds (where applicable)
  • Increased Boost levels (where applicable)
  • Re-calibrations for end user’s available premium fuel (91/93oct. or 100oct)
  • Off road only/track use tunes available.
  • Top Speed Limiter removal
  • Exhaust burble & “pops” (where applicable)
  • Some features will vary from vehicle to vehicle. Please do not hesitate to call us at 786-401-6520 or email us at info@velosdesignwerks.com with any question pertaining to your vehicle. Don’t forget to include year/make and model.

Dyno Video:

Dyno Charts:

Additional Information
Tuning Type

Bench, VELOS OBD Module

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Audi RS7 (4.0 TFSI V8) Tuning 2014 – 2017”

Your email address will not be published. Required fields are marked *

sixteen + 9 =