Store

BMW X5M / X6M 5.0 (4.4 V8 Twin Turbo) Tuning 2015 – 2019 (F85 & F86)

$1,950.00$2,295.00

Clear
Description

BMW

X5M / X6M

4.8 V8 Twin Turbo

2015 – 2019 (F85 & F86)

Tuning Method:

VELOS OBD Module, Bench

HP Gain: 135

TQ Gain: 120

 The F85 X5M & F86 X6m boast an amazing maximum output of 575HP at roughly 6200 rpm which is a 4% increase over the previous model. Peak torque is increased by roughly 10% giving this version roughly 70 lb ft of torque over the previous model. While BMW has done an amazing job with the vehicle and not to mention the new 8 speed transmission there was still some power left on the table and our engineering team has spent countless amount of hours in R&D to provide a reliable tune well within factory safety parameters.

With hundreds of the previous Generation E70 X5M’s tuned the excitement with this platform has gone through a few stages with the most recent allowing us to produce gains of 145 hp and 125 tq on the F85 platform. With changes to fuel, ignition, limiters and other parameters the results raise this SAV to a new level. All changes done well within factory specs this upgrade is a must for the enthusiasts looking to maximize their M without any compromise.

As electronic and computer technology rapidly advances at exponential rates long gone are the days of carburetors, distributors and set ignition timing. For years these were some of the components tuners manipulated to extract additional horsepower from our sport cars of yesteryears. As computer controlled engines emerged these and eventually many other parameters critical to the efficiency and operation of these high-performance engines became controlled by one or in some case more than one computer. Vehicle manufactures found that they can limit an engines power, maintain one powertrain platform and offer it in many trims levels and sometimes in different vehicle models within the vehicle mark with little change to hardware components. This proved to be a cost effective way to offer special edition vehicles with more power than their standard counter parts or having enticing bumps in power as the model year’s progress on particular chassis.

Velos Designwerks’ software engineers are able to communicate with the vehicle’s engine management systems carefully scrutinizing all areas of the control module in doing so our engineers acquire an understanding for what the powertrain is capable of delivering in terms of reliable power. The benefits to this method lie in the fact that all safety parameters instilled by the factory engineers are maintained and all other operation modules and computers such as traction control, stability management systems and transmission control modules are aware of the changes and thus are able to work harmoniously just as the factory intended. Velos Designwerks performance software has been at the forefront in terms of technology and strives to deliver exceptionally reliable, user friendly software packages for the daily driven luxury or exotic vehicle in your garage.

Velos Designwerks performance software key features include but are not limited to:

  • Improved Throttle Response
  • Re-calibrated settings for a smoother part throttle transitions
  • Re-calibrated settings for a smoother and more linear power delivery
  • Raised RPM thresholds (where applicable)
  • Increased Boost levels (where applicable)
  • Re-calibrations for end user’s available premium fuel (91/93oct. or 100oct)
  • Off road only/track use tunes available.
  • Top Speed Limiter removal
  • Exhaust burble & “pops” (where applicable)
  • Some features will vary from vehicle to vehicle. Please do not hesitate to call us at 786-401-6520 or email us at info@velosdesignwerks.com with any question pertaining to your vehicle. Don’t forget to include year/make and model.

FullSizeRender[7]

Additional Information
Tuning Type

Bench, VELOS OBD Module

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BMW X5M / X6M 5.0 (4.4 V8 Twin Turbo) Tuning 2015 – 2019 (F85 & F86)”

Your email address will not be published. Required fields are marked *

18 − 6 =

Description

BMW

X5M / X6M

4.8 V8 Twin Turbo

2015 – 2019 (F85 & F86)

Tuning Method:

VELOS OBD Module, Bench

HP Gain: 135

TQ Gain: 120

 The F85 X5M & F86 X6m boast an amazing maximum output of 575HP at roughly 6200 rpm which is a 4% increase over the previous model. Peak torque is increased by roughly 10% giving this version roughly 70 lb ft of torque over the previous model. While BMW has done an amazing job with the vehicle and not to mention the new 8 speed transmission there was still some power left on the table and our engineering team has spent countless amount of hours in R&D to provide a reliable tune well within factory safety parameters.

With hundreds of the previous Generation E70 X5M’s tuned the excitement with this platform has gone through a few stages with the most recent allowing us to produce gains of 145 hp and 125 tq on the F85 platform. With changes to fuel, ignition, limiters and other parameters the results raise this SAV to a new level. All changes done well within factory specs this upgrade is a must for the enthusiasts looking to maximize their M without any compromise.

As electronic and computer technology rapidly advances at exponential rates long gone are the days of carburetors, distributors and set ignition timing. For years these were some of the components tuners manipulated to extract additional horsepower from our sport cars of yesteryears. As computer controlled engines emerged these and eventually many other parameters critical to the efficiency and operation of these high-performance engines became controlled by one or in some case more than one computer. Vehicle manufactures found that they can limit an engines power, maintain one powertrain platform and offer it in many trims levels and sometimes in different vehicle models within the vehicle mark with little change to hardware components. This proved to be a cost effective way to offer special edition vehicles with more power than their standard counter parts or having enticing bumps in power as the model year’s progress on particular chassis.

Velos Designwerks’ software engineers are able to communicate with the vehicle’s engine management systems carefully scrutinizing all areas of the control module in doing so our engineers acquire an understanding for what the powertrain is capable of delivering in terms of reliable power. The benefits to this method lie in the fact that all safety parameters instilled by the factory engineers are maintained and all other operation modules and computers such as traction control, stability management systems and transmission control modules are aware of the changes and thus are able to work harmoniously just as the factory intended. Velos Designwerks performance software has been at the forefront in terms of technology and strives to deliver exceptionally reliable, user friendly software packages for the daily driven luxury or exotic vehicle in your garage.

Velos Designwerks performance software key features include but are not limited to:

  • Improved Throttle Response
  • Re-calibrated settings for a smoother part throttle transitions
  • Re-calibrated settings for a smoother and more linear power delivery
  • Raised RPM thresholds (where applicable)
  • Increased Boost levels (where applicable)
  • Re-calibrations for end user’s available premium fuel (91/93oct. or 100oct)
  • Off road only/track use tunes available.
  • Top Speed Limiter removal
  • Exhaust burble & “pops” (where applicable)
  • Some features will vary from vehicle to vehicle. Please do not hesitate to call us at 786-401-6520 or email us at info@velosdesignwerks.com with any question pertaining to your vehicle. Don’t forget to include year/make and model.

FullSizeRender[7]

Additional Information
Tuning Type

Bench, VELOS OBD Module

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BMW X5M / X6M 5.0 (4.4 V8 Twin Turbo) Tuning 2015 – 2019 (F85 & F86)”

Your email address will not be published. Required fields are marked *

twelve + 15 =